No Water

Possible causes: ants, bad breaker, or power problems.

Locate the control center. Check power to pressure switch located at pressure tank above pressure gauge.

Check overloads under control box; you should have 1 or 2 red overload buttons that can be tripped to restart the pump and motor.

Low Pressure

If you have low pressure at the house, check water pressure at the well. If pressure is low at the well, then you probably need a service call.

If you have low pressure at the house, but good pressure at the well, then check any in-line filters you have between the house and well.

Water Spraying

If water is spraying out of pop-off valve at the top of the well-head, then turn the power off and call for service.